Cruise Control for KTM 690 Enduro R 2014~2015 to 2018 ONLY TBW

(10% GST will be added in the cart for Australian orders only)

NOTE: - In some markets this cruise control will fit 2014 model year bikes, in others it will only fit models from 2015. Refer to the brochure for more detail about how to tell if this cruise control will fit the 2014 model KTM690 Enduro R.

The Motorcycle Cruise Control unit is adapted specifically for this vehicle, with a custom made and fully plug and play wiring harness, using genuine connectors and terminals as used by the manufacturer. There is no wire splicing or any other permanent changes made to your bike.

The motorcycle cruise installation instructions and specific cruise manuals and supporting documents can be found here. 

Cruise control switch mounting bracket - the MCCruise bracket uses the bike's original mirror mount (EMAIL US if you have removed the mirrors), and there are four options to choose from (see photos):

1. Standard below bar mounting bracket - puts the switch below the handlebar. Check that there is at least 25mm (1") clearance in a straight line below the bike's switch gear when the handlebars are turned full left.
   
   
2. Optional above bar switch mounting bracket - puts the switch above the handlebar.
   
   
3. New Slim MCCruise switch: Our new fully-featured and weatherproof switch, which is a no cost option and is fitted between the bike's switch block and the clutch lever mount. Backlit buttons for night use, power (ON-OFF) indicator light and engage indicator light. The switch is 10mm (3/8") wide, so it may be necessary to slide the clutch lever assembly across to make space to mount the switch on the handlebar. Contact us for installation instructions if you wish to see how it is fitted.

Aftermarket (not Original Equipment) LED brake/tail lights and Brake Light Modulators.

We are finding that quite a lot of owners are replacing the original tail light with aftermarket (accessory) LED tail lights. The cruise works with the OE LED tail light, but in most cases it needs an addition to the cruise control wiring harness to operate with an aftermarket LED tail light. If you have fitted or possibly intend to fit a different LED tail light or a brake light modulator to the bike, purchase this LED-brake-light-harness-modification with the cruise control. This modification will work perfectly with the original light and will make sure that it will also work with a different brake/tail light system.

Diagnostic Dongle for KTM motorcycles

Many KTM riders install CAN-BUS fuel or off-road dongles to the CAN-BUS diagnostic plug on their bikes. The MCCruise also taps into this plug, so to have two connections, a pass-through patch harness is required to support accessories downstream of the MCCruise connection. To facilitate this process, MCCruise makes a specific connector for KTM motorcycles and will make more for other motorcycles as the need arises.

If your bike has any sort of CAN-BUS dongle connected to the CAN-BUS diagnostic plug, please ensure when buying your new MCCruise you select the Dongle Connection Included button, rather than buying this accessory later. Buying at the same time as buying your cruise control minimizes shipping costs for customers.

Download the Brochure now:

The electronic cruise control unit is shipped worldwide with all parts, parts list and detailed installation instructions for this kit.

Download the Parts List now: