(10% GST will be added in the cart for Australian orders only)

Make sure you tell us what make and model bike you have in the 'special instructions' in the cart!

Revitalise your cruise control with a new MCCruise computer and software package!

Simply order a replacement computer* and we'll ship one out with the new software already pre-configured to your bike, by post, as soon as possible (if you want it urgently, shipping by air courier is an option when you check out). At only $250 plus shipping you save hundreds of dollars on the cost of a new kit and over a thousand when installation is included!

*NOTE 1: If you have the older MCSU400C or MCS800 computer in the Aluminium box, please check if your computer can be UPGRADED, or if it needs replacement. If your computer looks like the one in the photo its software can be upgraded if the small label (opposite the plug) has the suffix - V2.83BL. If it's older software V2.79 or V2.83 (without the suffix 'BL') it CANNOT accept a software upgrade and must be replaced.

*NOTE 2: If you have the older MCSU400C or MCS800 computer in the Aluminium box, if the label on your computer has been destroyed and you don't know which one you have - you can tell by observing the back lights on the cruise control switch when you turn on the key to the bike. If there is a pause between the key turning on and the back lights coming on - more than a second or two - then you have a computer which can accept a software upgrade. If the key turns the back lights on instantly, then I regret you need a new computer. The older MCSU400C/MCS800 computer is no longer available, but it can be replaced with the new MCS8128C computer, the connector is the same, but needs to be re-pinned (wires in different positions) which is not difficult and does not need any special tools.

You may have to turn the ignition switch on and off TWICE to be sure. If the ignition has been turned off for a while, the lights will come on almost instantly the first time the key is turned on regardless. The second time, if the back lights don't come for a couple of seconds after the ignition is turned on, the cruise computer is re-programmable.

*NOTE 3: The MCS8128TBW cruise computer is no longer available and has been replaced by the MCS10128TBW computer. The connector is the same but the cruise harness connector must be re-pinned to suit the different wiring positions. This is not difficult and does not need any special tools.

Please let us know what bike you have (Manufacturer, model & year) in the comments section when you order.

SEE WHAT CUSTOMERS HAVE TO SAY ABOUT THE NEW SOFTWARE

Universal BikeCruise Parts Kits

You also Viewed

About

Site

Main Menu

Connect

Join us and get nice things