(10% GST will be added in the cart for Australian orders only)

To suit Kubota RTV-X900, X1100, X1120 & X1140 from 2014.

The Electronic ATV 'SpeedSafe' (Speed Limiter) unit is specifically designed for this vehicle, with selections depending on speedometer fitment, and allows FULL POWER up to the limiting speed.

UTV SpeedSafe Speed Limiters are an after-market accessory designed for use with a variety of ATV, UTV and Side by Side vehicles.

Specifically developed to reduce the risk of accidents produced by excessive speed, this product allows owners / supervisors to restrict the maximum speed of the vehicle, without reducing power or performance.

The result:

Increased productivity
Reduced on-going maintenance costs
Promotes best practice Health and Safety standards
Decreases liability

Please read the UTV SpeedSafe Product Information Brochure for more detailed information prior to purchasing this item.

SpeedSafe installation instructions, specific manuals and supporting documents can be found here.

Select the vehicle model from the first button selection.

A set-up switch to configure the speed limiter is necessary and is OPTIONAL. Only ONE switch is required for a fleet of vehicles (see notes below). Select the set-up switch from the second button selection at the bottom of the page.

Select the 'Tamper Resistant' or 'Standard' configuration from the third button drop selection. Please read the SPEEDSAFE BROCHURE for details. NOTE: Tamper resistant option is not available on the RTV-X900.

Download the Brochure now:

The electronic speed limiting unit is shipped worldwide with all parts, parts list and detailed installation instructions for this kit.

Download the Parts List now:

Click here for more information on this Electronic Speed Limiter

BEFORE ORDERING YOUR KIT:

Please read the PRODUCT BROCHURE for important information about this SpeedSafe unit and your vehicle. In particular you must decide if you want 'Standard' or Tamper Resistant' default configuration.
MCCruise pre-configures SpeedSafe limiting speed to 15MPH (25km/h) by default, or as specified at time of purchase - please EMAIL US or use the Cart comment box if you want a different default speed.
The setup switch is REQUIRED for the installer/owner to setup & configure the speed limiter, change the limiting speed, or run diagnostic testing. The switch is common to the entire SpeedSafe range and spare switches are sold on request. If you do not require more than one switch, each SpeedSafe product can be bought without a set-up control switch at reduced cost.

Kubota SL

You also Viewed

About

Site

Main Menu

Connect

Join us and get nice things